Skip to content

How To Maintain A Sharp Shaving Blade

Listen to this article

AWkrMpf

[Introduction by “Mantic59”: I’ve been playing with strategies to extend blade life for a year or so now but I hadn’t put “pen to paper” yet.  Then I received an article draft with a similar topic from David Barker of Grooming Corp, so we decided to combine efforts.]

Can you extend the life of a razor blade?  The answer seems to be yes, but with variations depending on a number of circumstances. Here are some tips on extending the life of a razor blade.

Why Bother?

Why even bother about extending a razor blade’s life?  Razor blades are cheap, right?

Yes, many double edge razor blades are cheap. But will your favorite one(s) always be available?  Will the specifications change or will the brand be dropped altogether (*cough*PolsilverIridium*cough*)?  Sometimes it’s desirable to extend the “stock level” of your favorite blade while you can.

And what about other blades?  Some single edge blades (GEM, Injector, FHS, etc.) are comparatively expensive or in limited supply.  And do I need to get into the cost of some multi-blade razor cartridges?

The Key Concepts For Extending Blade Life

Extending razor blade life is dependent on the interaction of three strategies.  For maximum life a blade should be:

  • Clean
  • Dry
  • Kept away from air

However these strategies are not necessarily cumulative.  In fact the make-up of the blade itself may govern which strategy(s) work best.  Let’s look at some of the variables and what they may mean to blade life.

Blade Manufacturing Variations

The way the blade is manufactured varies between different brands and manufacturing facilities:

1. Coating

Some blades don’t have any coating at all but many use different coatings for specific purposes:

PTFE (“Teflon”) coatings help reduce friction between the blade and your skin (and stubble) helping to minimize irritation (which may make it a good choice in particular if you have sensitive skin).

Platinum, Chromium, and ceramic coatings help minimize corrosion of the blade which would otherwise cause the blade to become dull and increase the risk of nicks and cuts.

Sometimes coatings are combined.  For example the Feather FHS blade has a PTFE coating on top of a Chromium coating.

As the blade is used the coatings wear away.

2. Material

Razor blades will sometimes come in a different material such as carbon steel, but the vast majority will be made from stainless steel. This is the material of choice because it’s easy to work with and rust-resistant which helps the blade to last longer.

3. Blade Grinding

Every razor blade edge will be sharp, but some are sharper than others and this will impact how aggressive they are. Feather double edge blades, for example, are known for being some of the sharpest blades on the shaving market.

Very sharp blades could be great for you as they mean you may need fewer passes to get a close shave. However, if you have sensitive skin it could lead to more irritation if you tend to put pressure on the razor: if you’re new to using a safety razor it could lead to more nicks and cuts.

So What To Do?

Unfortunately it can be difficult to find out the precise manufacturing process so the best thing to do may be to try a number of different strategies to see which one(s) work best for you.  See “Strategies For Specific Blades” below for more information.

In any case, there is plenty you can do on your end to avoid having dull shaving blades and the irritation, nicks, and cuts that go with it.

[Editor’s Note: Amazon links are Sharpologist affiliate.]

Cleaning

There are several simple things you can do to keep a blade clean:

Rinse after every use

While shaving hair and the shaving cream can get stuck in the blades. Over time, this makes the blades gunky and rusts, rendering it useless. An undeniable solution for this is rinsing the razor after every use. To get better results at this, rinse between shaves with running water instead of blowing off whatever jams inside the blades.

“Stropping”

Stropping your shaving blade is a proven way of making it remain sharp for longer. Traditional shaving blades used to have a sharpening tool, unlike most modern razors. Stropping is quite easy, and you only need a pair of jeans to get it done. Firmly hold the denim and push the blade along the surface of your denim in the reverse direction you are shaving for about 20 strokes.

Cleaning with a cotton ball

Besides rinsing the shaving blade after use, clean the blade using a cotton ball. Even with the regular rinsing, there are still hair strands and shaving cream that gets jammed in between the blades making the razor seem blunt. To rid yourself of this problem, use cotton balls to clean the shaving blade because they get into the spaces between the blades and remove all the dirt there.

Razorpit

A commercial option is to use a cleaning pad like Razorpit:

razorpit original

“The dullness of the blade is not because of the hairs between the blade it is caused by particles of hair, soap and dead skin cells left on the edge of the blade. RazorPit removes this like a charm”

Drying

Moisture is a significant cause of blade life as it corrodes the blades making the sharp edges ineffective.

Water and metal are not a good match as the blades rust over an extended time. This means you want to keep your shaving blade dry. Before you put the shaving blade away after rinsing, use a dry piece of cloth to wipe down the shaving blade with a “blotting” action. Be sure to use a thick fabric to prevent damage from the blades. Many just use a towel as it is made from a thick and sturdy material.

You also want to keep your shaving blade free from bacteria to protect yourself from getting any infections or the blade from becoming ineffective after weeks of regular use. The best component to use for sterilization is alcohol. Alcohol kills bacteria and hastens the drying process. Dip your shaving blade in alcohol after use to dry quickly plus you also get a very clean and shiny edge.

Blew

A commercial alternative is Blew:

blew

“It’s not the act of repeated shaving that causes blades to quickly dull. It’s corrosion. Caused when water mixes with salt from the skin leading to rusting and chipping of the blade.

How it Works:

By placing your razor in BLEW after each use, you can effectively prevent razor-rusting oxidation. BLEW dries your razor with a heated fan (similar to that of a hair dryer) and during the drying process, a UV light will help sanitize your razor. All of this is done with an automatic shut off feature that lets you drop in your razor and go on with the rest of your morning routine.”

Keeping The Blade Edge Away From Air

Water and oil do not mix, and this means using oil is an excellent way of preventing the shaving blade from corroding. This keeps your shaving blade sharp for a longer time by preventing moisture from oxidizing the metal. Pour some pre-shave oil, vegetable oil, mineral oil, or baby oil in a small pot or glass and leave your razor head down after every use. Another strategy some use is to coat a blade with aftershave balm after drying.

Storage

Besides all your other efforts to maintain a sharp shaving blade, where you store the shaving razor can play an important role. The idea behind the proper storage of shaving blades is to keep them away from air and moisture. It makes a lot of sense to have your shaving blade in the bathroom, but this is the wrong place to keep it. The bathroom is moist most of the time, and that means leaving the shaving blade in the bathroom exposes it to a lot of moisture.

Go slow with the shaving cream

If you prefer using shaving cream to get a smoother shave, then you need to be cautious with the amounts that you use. There are different brands of shaving blades and creams, and all have a different effect on each other. Too much shaving cream clogs the blades making it blunt and leads to nicks and cuts. When shaving, ensure you use just enough of the cream. Remember to rinse in between shaves to clear the spaces between the blades.

Strategies For Specific Blades (by “Mantic59”)

As mentioned earlier, the strategies for extending blade life do not seem to be cumulative.  I’ve spent the last year observing how different strategies affect specific types of blades.

Many “thicker” blades like Injector, GEM, barber blades (like Feather Professional), and Feather FHS (for OneBlade razors) seem to benefit most from a heavy oil coating on the blade edge after the shave to keep it away from air.  In my own trials I have doubled the life of a Feather FHS blade with a heavy oil coating–vegetable oils or pre-shave oils work well.  Save-My-Blades works well too (interestingly, it worked better for cartridge razors than it did for thick blades  Why? I have no idea, but that was my observation).

Many thinner double edge blades seem to benefit most from a good cleaning and “stropping” strategy.

Cartridge razors seem to benefit most from a drying strategy.  The Blew dryer mentioned above actually seems to work pretty well for me in this respect and the UV light sanitizes the razor to boot.

Conclusion

Depending on how often you shave, you may need to replace your shaving blades often. Either way, you must take care of the razor and keep it sharp while its service to you. I hope these techniques will be of great help to you no matter the shaving blade brand you use.

BIO:

David Barker

David Barker is the founder of Grooming Corp, a male grooming and self-care site. He founded the site to provide easy grooming techniques and products to help men improve their lifestyles and achieve the kind of confidence that he did through personal care.  The techniques and products he features are all derived from his experience practicing different self-care techniques on himself for the last 7 years. 

Author

18 thoughts on “How To Maintain A Sharp Shaving Blade”

  1. I’ve been getting 2 shaves from FHS, which aren’t that cheap, on my One Blade. I take the blade out, rinse, towel dab dry, reinsert into my rinsed and dried handle, and store upright in a bathroom cabinet. How do you suggest I apply the oil?

    1. If you don’t want to take the blade out of the razor I just dribble a little oil over the blade edge.

  2. I use a Gem Blue Star or Pal single edge blade. I always take it out of the razor after shaving, and clean it off, then let it air dry.

  3. Hi. My son (yet to make the jump to a double-edged blade and using cartridges like Fusion) wonders whether the cotton ball, alcohol or both (cotton dipped in the alcohol) would do anything beneficial for his Fusion cartridges. My guess was “try it; the worst that happens is the little spaces get clogged with cotton and you will quickly know”). But could it be beneficial in terms of sharpness, closeness or blade life there too?

  4. George C Haven Jr

    I appreciate the article. I have read on some forums that “corking” the blade, (running the edges once through a dense cork), works for some. Have you had any experience with “corking”? I simply use a towel and dry the razor and have never had an issue with visible rust or corrosion. Maybe I should use the blade until it starts feeling rough, “cork” the blade, and then see how the blade feels. Thanks,
    George Haven

  5. Alcohol does not sterilise, it is a disinfectant. If it did sterilise, hospitals would be able to use it to sterilise their surgical instruments and hypodermic needles rather than going to the palaver of expensive autoclaving or using disposables.

  6. I agree that with DE blades being so cheap why bother? However, I prefer the Fusion cartridge. I have found using “Blade Buddy”, which is essentially a ribbed strip of rubber, I can extend the “life” of the cartridge by 4 – 5 shaves easily so that the cart lasts me easily a full month or more. It’s about $12. The Razorpit cited is very expensive, almost $28. with shipping, and claims to extend the life of the blade to 150 shaves. That’s just 2 blades a year. Call me a cynic but I just find that too difficult to believe. I wouldn’t want to shave with a blade that has been used “only” 149 times.

  7. Thank you for the great article. I have some mineral oil and also some glycerin but not for that purpose. I do the swish in isopropyl alcohol. I read about that in Leisureguy’s excellent book years ago in it’s first edition and that doesn’t take more than a few moments.

  8. When I used expensive cartridges I stored my razor in a 50:50 solution of glycerin and water. The cartridges lasted a long, long time. However, with cheap DE blades, why bother. I’m sure the oil cost more than what you end up saving in the long run.

  9. I enjoyed reading the article, but… Blades are cheap! I buy 100 blades for about $12 (with shipping), and that works out to $.0833 a blade and a blade last me about 1 week. I’m really not that concerned about saving the blade. I would be buying oil which the cost has to be added on, because I don’t use shave oil. And… I’d probably cut my self.

    1. I added a “Why Bother” section to the beginning of the article to better explain my thoughts.

  10. It depends whether the blade’s cost makes the effort worthwhile. A blade that costs 10¢ and lasts a week in normal use means $5.20/year on blades. If all those efforts DOUBLED the blade’s useful life, the savings would be $2.60/year (or 5¢ per week: less than 1¢ a day). I don’t think a penny a day warrants much effort or concern. You can save a LOT more by (for example) skipping the store-bought latte in favor of a thermos of tea, or not buying already-prepared meals but cooking your own.

    1. I added a “Why Bother?” section to the beginning of the article to better explain my thoughts.

    2. I agree with the Leisureguy. Cost effectiveness is THE issue to consider. I believe each person could and should identify at least one or two tasks that he can do that will save serious money. And by serious money I’m not talking about a few pennies a week on razor blade maintenance.

      Personally, my savings activity is twofold: I change the oil and filter on my cars 4 times a year, instead of paying a mechanic to do it, and I mow my lawns instead of paying a gardener $80 a month. Such a regimen saves me well over $1000 yearly. I’ve done this for over 50 years. Care to do the math?

  11. One and done (or two and through) depending on the brand of blade. Double edge blades are not that pricey. I’m not taking any chances. When I read about people getting 100 shaves per blade I say “why?”

    1. Brian Fiori (AKA The Dean)

      I’m with you on this one, Larry.

      Though to each their own, I suppose. If someone wants to eek every possible shave out of a blade, let them have at it. For me, depending on the blade and how many days between shaves, it’s typically one or two shaves per blade. Now that I’m only trimming my neck line around my Corona-beard, I might use it three times.

    2. I added a “Why Bother?” section to the beginning of the article to better explain my thoughts.

Comments are closed.