[Note from Mantic59: Raoul Pop, a wet shaver who is also a photographer and a watch aficionado, talks about watch bands.]
I put together a video guide that will help you decide the proper watch band for you. You may not have given a lot of thought to this topic in the past, or perhaps you’ve just lived with the band or strap that your watch came with, but I think after you watch my guide, you’ll start to think differently about watch bands — about the materials they’re made of and about the quality that you’ll want.
By average YouTube video length standards, my guide is like a novel, weighing in at around 20 minutes. I wanted it to be thorough. If you haven’t got 20 minutes to spare, here’s the abridged text version.
Watch bands are made of four different materials:
- Rubber or silicone
Leather watch bands are simple, elegant, readily compatible with all skin types, but they may wear out quickly, may tear and may smell (with time). If you get a leather watch band, make sure it’s molded round, it’s stitched with strong thread (contrasting thread adds an extra element of style) and that it’s thicker at its base (where it attaches to the watch) and thinner at its ends. This makes it strong and at the same time easy to attach to and detach from the buckle.
Metal watch bands are sturdy, practical, modern and they last a long time, but they may not fit properly on your wrist, may change color (oxidize), may open readily if clasp mechanism is worn or fails, and may not be compatible with all skin types (may cause rashes). If you get a metal watch band, know that mesh bands offer a better fit than link bands and link bands will need to be adjusted to your wrist at a watch shop.
Cloth watch bands are cheap, sturdy and colorful, but they may fray, discolor, smell and may not be easy to attach and detach. Go for cloth watch bands with metal (not cloth) loops and try not to wear them too much, or they’ll discolor and get grimy, and they’ll stay grimy even if you wash them.
Rubber watch bands are cheap, sturdy, great for aquatic sports and easy to wash. Newer silicone bands are colorful. But rubber and silicone bands may discolor or form a film on the surface when exposed to chlorine and salty water, may accumulate dust and grime inbetween their ridges, and let’s face it, they’re not elegant. If you get a rubber watch band, go for simple bands with fewer or no ridges and watch out for silicone watch bands, which will literally attract dust and grime. Only wear them when working out and wash them afterward as you shower, to make sure they stay clean.
Finally, there are two mechanisms for keeping the bands closed: the buckle and the clasp. The buckle is a time-proven design, works forever but is slow to open/close. The buckle will also indent the leather band where it closes and its pin may tear through the punch hole over time, requiring the purchase of a new band. The clasp is a modern, practical design which opens and closes quickly. The clasp pins and pin holders may wear out over time, causing the clasp to open suddenly and the watch to fall from the wrist. Whichever design you choose, go for something simple that is less likely to break.
I hope this has helped you!
[This post originally appeared on Raoul Pop and is re-published with permission.]